How it works – 3 easy steps

ATR Leveling-3-Easy-Steps–Step-1

Spread mortar, install tile, screw spindle into spacing plate: slide spacing plate under tile – install adjacent tiles

ATR Leveling-3-Easy-Steps–Step-2

Turn spindle clockwise by hand or by light cordless drill using a 10mm socket until tiles are flush


When adhesive is dry remove spindle by hand or by cordless drill


ATR Tile Levelling System minimises tile lippage. Watch the glass slide.

Socket bit – Do it quick

We know your time is precious. We know you want to move onto your next job or spent time doing other stuff, so we made our own socket bit that is guaranteed to fit our spindles safely and securely.

Attach the socket bit to your drill and adjust the spindle in a flash. Removing the spindle when your adhesive is dry is also super fast.

We recommend that your drill be no greater than 10.8 volts and its cluch set to low. Visit our guides page for more information on how to get the best results with your drill and the ATR Tile Leveling Alignment System.

No special tools required

Our product range include the CROSS spacing plate (where 4 tiles are adjacent to each other), the EDGE spacing plate (where 2 tiles are adjacent to each other), T spacing plate (for use on brick pattern or offset installations - no special tools needed) and the reusable SPINDLE which is universal for use with all our spacing plates and can be used on tiles of thicknesses from 6mm to 18mm.

SAFE, FAST & EASY – While other leveling systems use clips and wedges the unique ATR Tile Leveling Alignment System features a reuseable screw-in spindle, giving the user greater control and flexibility. You can fine tune and if required reverse supporting tension and achieve fantastic, professional results. It can simply be done by hand. No special tools required.


  • All-in-one grout spacing and tile leveling system
  • Very simple and easy to use
  • Creates a lippage free surface
  • Keeps tiles in place while drying
  • Professional finish every time
  • Suitable for floors and walls
  • Suitable for indoor and outdoor uses
  • Spindle removes cleanly and easily without any force applied
  • Reusable spindle
  • Great labour saving 4 to 1 ratio*
  • Australian design and Australian made

* You only need 1 cross spacing plate for 4 tiles. Other tiling systems require 4 clips per 1 tile.

Australian made and owned

Visit Blog


go back to top